IEEE.org     |     IEEE Xplore Digital Library     |     IEEE Standards     |     IEEE Spectrum     |     More Sites

Skip to content
GitLab
Commit 5bdd94e6 authored by alfredo herrera's avatar alfredo herrera
Browse files

Initial commit - VM post-install

parent 78fdc868
Hide whitespace changes
Inline Side-by-side
bin/eclipse-mcu_install.sh 0 → 100644
View file @ 5bdd94e6
#!/bin/bash
#------------------------------------------------------------------------------
# Copyright (c) 2019 BTA Design Services Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#------------------------------------------------------------------------------
# Authors: Alfredo Herrera (aherrera@btadesignservices.com)
# KichwaCoders (info@kichwacoders.com)
#---
# This script installs the eclipse-ide, the MCU plugins and configures eclipse
#------------------------------------------------------------------------------
#---
# Exit if not in a script, if sudo/root or if runtime errors
#---
function die() {
echo "$@: " 1>&2
exit 1
}
# ref: https://askubuntu.com/a/30157/8698
if [ $(id -u) = 0 ]; then
echo "The Eclipse-IDE and MCU plugins installation script shall not be run as root." >&2
exit 1
fi
# Show commands being used and error out on unexpected situations
set -eux
echo "Installing Eclipse-IDE and MCU plugins"; echo""
cd /home/user
curl -L https://github.com/gnu-mcu-eclipse/org.eclipse.epp.packages/releases/download/v4.5.1-20190101-2018-12/20190101-2023-gnumcueclipse-4.5.1-2018-12-R-linux.gtk.x86_64.tar.gz > 20190101-2023-gnumcueclipse-4.5.1-2018-12-R-linux.gtk.x86_64.tar.gz
curl -L https://github.com/riscv/riscv-ovpsim/archive/master.zip > riscv-ovpsim-master.zip
# Extract eclipse that includes GNU MCU plugins, eclipse executable will be ./eclipse/eclipse
tar xf 20190101-2023-gnumcueclipse-4.5.1-2018-12-R-linux.gtk.x86_64.tar.gz
# Setup RISC-V OVP Simulator
unzip riscv-ovpsim-master.zip
mv riscv-ovpsim-master riscv-ovpsim
cd /home/user
rm 20190101-2023-gnumcueclipse-4.5.1-2018-12-R-linux.gtk.x86_64.tar.gz riscv-ovpsim-master.zip
bin/pulp_install.sh 0 → 100644
View file @ 5bdd94e6
#!/bin/bash
#------------------------------------------------------------------------------
# Copyright (c) 2019 BTA Design Services Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#------------------------------------------------------------------------------
# Authors: Alfredo Herrera (aherrera@btadesignservices.com)
#---
# This script installs the PULP-platform toolchain.
#------------------------------------------------------------------------------
# Exit if not in a script, if sudo/root or if runtime errors
#---
function die() {
echo "$@: " 1>&2
exit 1
}
# ref: https://askubuntu.com/a/30157/8698
if [ $(id -u) = 0 ]; then
echo "The PULP toolchain installation script shall not be run as root." >&2
exit 1
fi
# Show commands being used and error out on unexpected situations
set -eux
#---
# Install PULP-platform GNU toolchain
#---
echo "Installing PULP GNU toolchain"; echo""
cd /home/user
git clone --recursive https://github.com/pulp-platform/pulp-riscv-gnu-toolchain
cd pulp-riscv-gnu-toolchain
./configure --prefix=/home/user/pulp --with-arch=rv32imc --with-cmodel=medlow --enable-multilib
make
cd /home/user
rm -rf pulp-riscv-gnu-toolchain
bin/riscv_vm_setup.sh 0 → 100644
View file @ 5bdd94e6
#!/bin/bash
#------------------------------------------------------------------------------
# Copyright (c) 2019 BTA Design Services Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#------------------------------------------------------------------------------
# Authors: Alfredo Herrera (aherrera@btadesignservices.com)
# KichwaCoders (info@kichwacoders.com)
#---
# This script can be used to install a subset of RISC-V tools to study,
# configure as-referred, modify, implement or release hardware based on the
# RISC-V Instruction Set Architecture. The VM is preconfigured for RISC-V HW
# development.
# * RISC-V SW tool chain using the Eclipse-IDE
# * RISC-V Imperas OVPSim model
# * RISC-V Verilator model
#
#---
# Exit if not in a script, if not sudo/root or if runtime errors
#---
function die() {
echo "$@: " 1>&2
exit 1
}
# ref: https://askubuntu.com/a/30157/8698
if ! [ $(id -u) = 0 ]; then
echo "The RISC-V VM installtion script needs to be run as root." >&2
exit 1
fi
# Show commands being used and error out on unexpected situations
set -eux
#---
# Update UBUNTU OS prior to installing tools
#---
echo "Updating Ubuntu"; echo""
apt-get install openssh-server xauth git-core lsb-core xorg vim-gtk3 dos2unix
# libudev package not available
apt-get install autoconf automake autotools-dev curl libmpc-dev libmpfr-dev libgmp-dev gawk build-essential bison flex texinfo gperf libtool patchutils bc zlib1g-dev libusb-1.0-0-dev libudev1 libudev-dev g++ openjdk-8-jdk
apt-get upgrade
apt-get clean
apt-get autoremove --purge
#---
# Install PULP-Platform GNU toolchain
#---
echo "Installing PULP GNU toolchain"; echo""
cd /home/user
sudo -u user git clone -recursive https://github.com/pulp-platform/pulp-riscv-gnu-toolchain
cd pulp-riscv-gnu-toolchain
sudo -u user ./configure --prefix=/opt/pulp --with-arch=rv32imc --with-cmodel=medlow --enable-multilib
sudo -u user make
cd ..
rm -rf pulp-riscv-gnu-toolchain
#---
echo "Installing Verilator tool"; echo""
cd /home/user
apt-get install libfl2 libfl-dev
git clone http://git.veripool.org/git/verilator
unset VERILATOR_ROOT
cd verilator
git pull
git checkout stable
autoconf
./configure
make
sudo make install
cd ..
rm -rf verilator
#---
echo "Installing rv32m1 tools"; echo""
curl -L https://github.com/open-isa-org/open-isa.org/releases/download/1.0.0/rv32m1_sdk_riscv_installer.sh > rv32m1_sdk_riscv_installer.sh
# Convert SDK shell script into the tar file -- this implictly accepts the license and extract to ./vega
ARCHIVE=$(awk '/^__ARCHIVE__/ {print NR + 1; exit 0; }' "rv32m1_sdk_riscv_installer.sh")
tail -n+${ARCHIVE} "rv32m1_sdk_riscv_installer.sh" | tar -xz > /dev/null 2>&1 || true
mkdir vega
(cd vega && tar xf ../rv32m1_sdk_riscv.tar.gz)
curl -L https://github.com/open-isa-org/open-isa.org/releases/download/1.0.0/Toolchain_Linux.tar.gz > Toolchain_Linux.tar.gz
# Extract toolchain, takes two steps as there are archives in Toolchain_Linux.tar.gz)
mkdir toolchain
pushd toolchain
tar xf ../Toolchain_Linux.tar.gz # this makes tar files for next lines
tar xf riscv32-unknown-elf-gcc.tar.gz
rm riscv32-unknown-elf-gcc.tar.gz
tar xf openocd.tar.gz
rm openocd.tar.gz
popd
#---
echo "Installing Eclipse-IDE and MCU plugins"; echo""
curl -L https://github.com/gnu-mcu-eclipse/org.eclipse.epp.packages/releases/download/v4.5.1-20190101-2018-12/20190101-2023-gnumcueclipse-4.5.1-2018-12-R-linux.gtk.x86_64.tar.gz > 20190101-2023-gnumcueclipse-4.5.1-2018-12-R-linux.gtk.x86_64.tar.gz
curl -L https://github.com/riscv/riscv-ovpsim/archive/master.zip > riscv-ovpsim-master.zip
# Extract eclipse that includes GNU MCU plugins, eclipse executable will be ./eclipse/eclipse
tar xf 20190101-2023-gnumcueclipse-4.5.1-2018-12-R-linux.gtk.x86_64.tar.gz
# Set the toolchain defaults for GNU MCU plug-ins to what we just "installed"
mkdir -p eclipse/configuration/.settings/
# openocd location
echo "eclipse.preferences.version=1" > eclipse/configuration/.settings/ilg.gnumcueclipse.debug.gdbjtag.openocd.prefs
echo "install.folder=$PWD/toolchain" >> eclipse/configuration/.settings/ilg.gnumcueclipse.debug.gdbjtag.openocd.prefs
# gcc & friends location
echo "eclipse.preferences.version=1" > eclipse/configuration/.settings/ilg.gnumcueclipse.managedbuild.cross.riscv.prefs
# (magic number comes from https://github.com/gnu-mcu-eclipse/eclipse-plugins/blob/ce601cf2ec20cba90d9f2c2fbdb236b5fd7a6385/bundles/ilg.gnumcueclipse.managedbuild.cross.riscv/src/ilg/gnumcueclipse/managedbuild/cross/riscv/ToolchainDefinition.java#L30)
echo "toolchain.path.512258282=$PWD/toolchain/riscv32-unknown-elf-gcc/bin" >> eclipse/configuration/.settings/ilg.gnumcueclipse.managedbuild.cross.riscv.prefs
# Setup RISC-V OVP Simulator
unzip riscv-ovpsim-master.zip
mv riscv-ovpsim-master riscv-ovpsim
# Optional, comment to preserve downloads
cd ~
rm rv32m1_sdk_riscv.tar.gz 20190101-2023-gnumcueclipse-4.5.1-2018-12-R-linux.gtk.x86_64.tar.gz rv32m1_sdk_riscv_installer.sh Toolchain_Linux.tar.gz riscv-ovpsim-master.zip
bin/rv32m1_install.sh 0 → 100644
View file @ 5bdd94e6
#!/bin/bash
#------------------------------------------------------------------------------
# Copyright (c) 2019 BTA Design Services Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#------------------------------------------------------------------------------
# Authors: Alfredo Herrera (aherrera@btadesignservices.com)
# KichwaCoders (info@kichwacoders.com)
#---
# This script installs the RISC-V GNU tools for the VEGA board
#------------------------------------------------------------------------------
#---
# Exit if not in a script, if sudo/root or if runtime errors
#---
function die() {
echo "$@: " 1>&2
exit 1
}
# ref: https://askubuntu.com/a/30157/8698
if [ $(id -u) = 0 ]; then
echo "The rv32m1 SDK toolchain installation script shall not be run as root." >&2
exit 1
fi
# Show commands being used and error out on unexpected situations
set -eux
#---
# Install rv32m1 SDK tools
echo "Installing rv32m1 tools"; echo""
cd /home/user
curl -L https://github.com/open-isa-org/open-isa.org/releases/download/1.0.0/rv32m1_sdk_riscv_installer.sh > rv32m1_sdk_riscv_installer.sh
# Convert SDK shell script into the tar file -- this implictly accepts the license and extracts to /home/user/vega
ARCHIVE=$(awk '/^__ARCHIVE__/ {print NR + 1; exit 0; }' "rv32m1_sdk_riscv_installer.sh")
tail -n+${ARCHIVE} "rv32m1_sdk_riscv_installer.sh" | tar -xz > /dev/null 2>&1 || true
mkdir /home/user/vega
(cd /home/user/vega && tar xf /home/user/rv32m1_sdk_riscv.tar.gz)
cd /home/user
curl -L https://github.com/open-isa-org/open-isa.org/releases/download/1.0.0/Toolchain_Linux.tar.gz > Toolchain_Linux.tar.gz
# Extract toolchain, takes two steps as there are archives in Toolchain_Linux.tar.gz)
mkdir toolchain
pushd toolchain
tar xf /home/user/Toolchain_Linux.tar.gz # this makes tar files for next lines
tar xf riscv32-unknown-elf-gcc.tar.gz
tar xf openocd.tar.gz
popd
# Set the toolchain defaults for GNU MCU plug-ins to what we just "installed"
mkdir -p /home/user/eclipse/configuration/.settings/
# openocd location
echo "eclipse.preferences.version=1" > /home/user/eclipse/configuration/.settings/ilg.gnumcueclipse.debug.gdbjtag.openocd.prefs
echo "install.folder=/home/user/toolchain" >> /home/user/eclipse/configuration/.settings/ilg.gnumcueclipse.debug.gdbjtag.openocd.prefs
# gcc & friends location
echo "eclipse.preferences.version=1" > /home/user/eclipse/configuration/.settings/ilg.gnumcueclipse.managedbuild.cross.riscv.prefs
# (magic number comes from https://github.com/gnu-mcu-eclipse/eclipse-plugins/blob/ce601cf2ec20cba90d9f2c2fbdb236b5fd7a6385/bundles/ilg.gnumcueclipse.managedbuild.cross.riscv/src/ilg/gnumcueclipse/managedbuild/cross/riscv/ToolchainDefinition.java#L30)
echo "toolchain.path.512258282=/home/user/toolchain/riscv32-unknown-elf-gcc/bin" >> /home/user/eclipse/configuration/.settings/ilg.gnumcueclipse.managedbuild.cross.riscv.prefs
rm rv32m1_sdk_riscv.tar.gz rv32m1_sdk_riscv_installer.sh Toolchain_Linux.tar.gz toolchain/riscv32-unknown-elf-gcc.tar.gz toolchain/openocd.tar.gz
bin/start-stop_vm.sh 0 → 100644
View file @ 5bdd94e6
#!/bin/bash
#------------------------------------------------------------------------------
# Copyright (c) 2019 BTA Design Services Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#------------------------------------------------------------------------------
# Authors: Alfredo Herrera (aherrera@btadesignservices.com)
#---
# This script starts the VM, ssh'es into the VM and shutdowns the VM upon exit
#------------------------------------------------------------------------------
#---
# Exit if not in a script, if sudo/root or if runtime errors
#---
function die() {
echo "$@: " 1>&2
exit 1
}
/c/bta_cadtree/VirtualBox/vb6_0_10/VBoxManage startvm riscv_vm3 --type headless
echo "waiting 15 seconds for VM to start"
sleep 15
read -p "Press [Enter] key to continue"
ssh -Yv user@192.168.56.103
read -p "Press [Enter] key to continue"
/c/bta_cadtree/VirtualBox/vb6_0_10/VBoxManage list vms --long | grep -e "Name:" -e "State:"
echo "If VM is still running, type the follwoing to shutdown:"
echo "/c/bta_cadtree/VirtualBox/vb6_0_10/VBoxManage controlvm riscv_vm3 poweroff"
bin/ubuntu_post-install.sh 0 → 100644
View file @ 5bdd94e6
#!/bin/bash
#------------------------------------------------------------------------------
# Copyright (c) 2019 BTA Design Services Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#------------------------------------------------------------------------------
# Authors: Alfredo Herrera (aherrera@btadesignservices.com)
#---
# This script installs ubuntu extra packages required for RISC-V tools
# which may be used to study, configure as-referred, modify, implement or
# release hardware based on the RISC-V Instruction Set Architecture.
# The VM is preconfigured for RISC-V HW development.
# * RISC-V SW tool chain using the Eclipse-IDE
# * RISC-V Imperas OVPSim model
# * RISC-V Verilator model
#------------------------------------------------------------------------------
#---
# Exit if not in a script, if not sudo/root or if runtime errors
#---
function die() {
echo "$@: " 1>&2
exit 1
}
# ref: https://askubuntu.com/a/30157/8698
if ! [ $(id -u) = 0 ]; then
echo "The Ubuntu post-installation script needs to be run as root." >&2
exit 1
fi
# Show commands being used and error out on unexpected situations
set -eux
#---
# libudev package not available
echo "Updating Ubuntu"; echo""
apt-get install -y openssh-server xauth git-core lsb-core xorg vim-gtk3 dos2unix autoconf automake autotools-dev curl libmpc-dev libmpfr-dev libgmp-dev gawk build-essential bison flex texinfo gperf libtool patchutils bc zlib1g-dev libusb-1.0-0-dev libudev1 libudev-dev g++ openjdk-8-jdk libfl2 libfl-dev
apt-get upgrade
apt-get clean
apt-get autoremove --purge
#---
# Install PULP-Platform GNU toolchain
#---
sudo -u user pulp_install.sh
#---
# Install Verilator tool
#---
verilator_install.sh
#---
# Install Elipse-IDE and MCU plugins
sudo -u user eclipse-mcu_install.sh
#---
# Install rv32m1 and OpenOCD tools
#---
sudo -u user rv32m1_install.sh
#---
# Install SEGGER J-Link drivers
#---
apt-get install -f ./JLink_Linux_V650a_x86_64.deb
bin/verilator_install.sh 0 → 100644
View file @ 5bdd94e6
#!/bin/bash
#------------------------------------------------------------------------------
# Copyright (c) 2019 BTA Design Services Inc.
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#------------------------------------------------------------------------------
# Authors: Alfredo Herrera (aherrera@btadesignservices.com)
#---
# This script installs the verilator tool
#------------------------------------------------------------------------------
#---
# Exit if not in a script, if sudo/root or if runtime errors
#---
function die() {
echo "$@: " 1>&2
exit 1
}
# ref: https://askubuntu.com/a/30157/8698
if ! [ $(id -u) = 0 ]; then
echo "The Verilator tool installtion script must be run as root." >&2
exit 1
fi
# Show commands being used and error out on unexpected situations
set -eux
echo "Installing Verilator tool"; echo""
cd /home/user
git clone http://git.veripool.org/git/verilator
pushd verilator
git pull
git checkout stable
autoconf
./configure
make
make install
popd
rm -rf /home/user/verilator
Supports Markdown
0% or .
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment

  Home      |      Contact & Support      |     Accessibility     |     Terms & Conditions      |     Nondiscrimination Policy     |     IEEE Privacy Policy     |     IEEE SA Copyright Policy